Product Features
The numbering of the product features refers to the diagram of the power tool on the graphics page.
(1) | On/Off switch |
(2) | Lock-off function for On/Off switch |
(3) | Auxiliary handle (insulated gripping surface)A) |
(4) | Spindle lock button |
(5) | Scale for mitre/bevel angles |
(6) | Wing bolt for mitre/bevel angle preselection |
(7) | Wing bolt for parallel guide |
(8) | 45° cut mark |
(9) | 0° cut mark |
(10) | Parallel guide |
(11) | Retracting blade guard |
(12) | Base plate |
(13) | Adjusting lever for retracting blade guard |
(14) | Chip ejector |
(15) | Protective guard |
(16) | Handle (insulated gripping surface) |
(17) | Hex keyA) |
(18) | Clamping bolt with washer |
(19) | Clamping flange |
(20) | Circular saw bladeA) |
(21) | Saw spindle with mounting flange |
(22) | Clamping lever for cutting depth preselection |
(23) | Cutting depth scale |
(24) | Pair of screw clampsB) |
(25) | Dust extraction adapterA) |
- A)
Accessories shown or described are not included with the product as standard. You can find the complete selection of accessories in our accessories range.
- B)
Commercially available (not included in the scope of delivery)