Changing the Tool
- Remove the battery from the power tool before carrying out work on the power tool (e.g. maintenance, changing tool, etc.). The battery should also be removed for transport and storage. There is risk of injury from unintentionally pressing the on/off switch.
GDR 18V-200 / GDX 18V-200:
Pull the locking sleeve (2) forward, guide the application tool (1) into the tool holder as far as it will go and release the locking sleeve (2) to lock the application tool.
Impact-proof screwdriver bits (12) can be inserted using a universal bit holder (11) with ball catch.
GDX 18V-200 / GDS 18V-200:
- When working with an application tool, pay attention that the application tool is connected securely to the tool holder. When the application tool is not securely connected with the tool holder, it can come off during application.
Slide the application tool (13) onto the square drive of the tool holder (1).
Due to the way the system operates, the application tool (13) will move around slightly in the tool holder (1); this has no influence on the function/safety.
Some application tools (e.g. double bits) cannot be safely secured in the tool holder.