Technical data
Cut-off grinder |
| GCO 230 |
|---|---|---|
Article number | 3 601 M56 0.. | |
Rated power input | W | 2300 |
No-load speed | min–1 | 4100 |
Base plate dimensions | mm | 489 x 265 x 73 |
Weight according to EPTA-Procedure 01:2014 | kg | 13.5 |
Protection class |
|
/ IIDimensions of suitable cutting discs | ||
|---|---|---|
Max. cutting disc diameter | mm | 355 |
Max. cutting disc thickness | mm | 3.3 |
Hole diameter | mm | 25.4 |
Permitted workpiece dimensions (maximum/minimum): see Permissible workpiece dimensions
The appliance meets IEC 61000-3-11 requirements and is subject to conditional connection. The appliance can lead to occasional voltage fluctuations under unfavorable power conditions. The impedance of this appliance is set as Zactual = 0.095 Ω. The user must make sure, that the connection point, with the impedance Zmax, on which the appliance shall be plugged in meets the impedance requirement: Zactual ≥ Zmax. If Zmax is unknown, determine Zmax in consultation with the network supplier or supply authority.
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Values can vary depending on the product, scope of application and environmental conditions. To find out more, visit www.bosch-professional.com/wac.