Transport Safety Lock (see figure C)

The transport safety lock (13) makes it easier to handle the power tool when transporting it to various working locations.

Unlocking the power tool (work position)

• Press the tool arm down slightly by the handle (2) to release the transport safety lock (13).
• Pull the transport safety lock (13) all the way out.
• Slowly guide the tool arm upwards.

Notes:

• Make sure that the transport safety lock is not pushed in when working, otherwise the tool arm will not be able to be swivelled to the required depth.
• If the transport safety lock is stiff when pulling/pushing, it should be lubricated so that it can move smoothly.

Locking the power tool (transport position)

• Guide the tool arm downwards until you can press the transport safety lock (13) all the way in.
• Lubricate the transport safety lock regularly.

Further information about transporting see Transport.