Selecting the working mode

The power tool has 2 preset working modes.

To switch between the two working modes, press the mode button (15).

Working mode

Meaning/function

Turbo mode

In Turbo mode, the power tool is run up to maximum performance.

This working mode only works if the power tool is set to clockwise.

Automatic shutdown (ABR = auto bolt release)

The automatic shutdown (ABR) is a function for releasing bolts or nuts: The power tool automatically shuts down as soon as the bolt or nut is released.
The automatic shutdown (ABR) prevents:

  • The bolt from falling down when released from the material
  • The nut from falling down when released from the screw thread

This working mode only works if the power tool is set to anticlockwise and the bolt or nut is still securely bolted.
If bolts or nuts have already been released, the automatic shutdown (ABR) is not active.