Bleeding (see figure I)

Bleeding via the bleed valve

• To bleed the grease cylinder (12) or the inserted cartridges, press the bleed valve (14) until grease is escaping continuously.

During bleeding, you can also press the on/off switch (6).

Active bleeding

• Lock the spring rod (23) by turning it 90° with the grease slider (25). Press on the bleed valve (14) and push the spring rod forwards until grease escapes from the nosepiece of the hose (19).
  or
  Press on the bleed valve (14) and push the base of the inserted cartridge (Reiner or Lube Shuttle type) forwards using a suitable object until grease escapes from the nosepiece of the hose (19).