Technical Data
Concrete grinder | GBR 18V-15 S | |
|---|---|---|
Article number | 3 601 G76 2.. | |
Rated voltage | V= | 18 |
Rated no-load speedA) | min-1 | 8500 |
Speed adjustment range | min-1 | 2600–8500 |
Diamond cup wheel diameter | mm | 125 |
Grinding spindle thread | M 14 | |
KickBack Control | ● | |
Drop Control | ● | |
Restart protection | ● | |
Soft start | ● | |
Overload protection | ● | |
Run-out brake | ● | |
Grinding close to edges | ● | |
Speed preselection | ● | |
WeightB) | kg | 2.6 |
Recommended ambient temperature during charging | °C | 0 to +35 |
Permitted ambient temperature during operationC) and during storage | °C | –20 to +50 |
Compatible rechargeable batteries | GBA 18V... | |
Recommended rechargeable batteries for maximum performance | ProCORE18V... ≥ 5.5 Ah | |
Recommended battery chargers | GAL 18V... |
- A)
Rated no-load speed for the selection of appropriate application tools in accordance with EN IEC 62841-2-3. The actual no-load speed must not exceed the rated no-load speed and is therefore lower.
- B)
with mounting flange (13) and clamping nut(15), without battery (you can find the battery weight on www.bosch-professional.com)
- C)
Limited performance at temperatures < 0 °C
Values can vary depending on the product, scope of application and environmental conditions. To find out more, visit www.bosch-professional.com/wac.