Operation with Power Supply

Pay attention to the mains voltage. The voltage of the power source must match the voltage specified on the type plate of the power supply.

For mains operations, use only a USB Type‑C® power supply with Power Delivery (USB-PD). Its output voltage, minimum output current and output power must comply with the requirements in the "Technical Data" section. Consult the operating instructions for the power supply. Using different power supplies can damage the speaker. If the power supply provides insufficient power, the speaker will switch itself off.

Open the flap for the USB Type-C® port (13). Connect the power supply to the USB Type-C® port (13) of the speaker via a suitable cable. Connect the power supply to the mains supply.

After removing the cable for the power supply, reattach the flap for the USB Type-C® port (13) to protect against dirt and debris.