Inserting and Removing the Rechargeable Battery (see figure A)

Unlock the locking mechanism (10) of the battery cover (9) and fold back the battery cover.

Insert the charged battery (13) into lamp head (1) until it can be felt to engage and faces flush against the lamp head.

To remove the rechargeable battery, press the battery release button and pull the battery out. Do not use force to do this.

The rechargeable battery has two locking levels to prevent the battery from falling out if the battery release button is pressed unintentionally. The rechargeable battery is held in place by a spring when inserted in the worklight.

Close the battery cover.

Make sure that the rubber lip is seated correctly when closing the battery cover. Otherwise protection against dust and splash water will not be ensured.