Storage and transport

Storing Tool Elements (see figure Q)

You can attach certain tool elements to the power tool to store them.

  • Place all loose tool elements in their brackets on the housing (see the table below).

Tool element

Storage

Protective cover (3)

Bracket (10); tighten with clamping lever (39)

Angle guide (1)

Holder (31)

Dust extraction adapter (32)

see figure Q

Ring spanner (34)

see figure Q

Hex key (9)

see figure Q

Push stick (7)

Hook into the bracket between the parallel guide (25) and the additional parallel guide (8)

Parallel guide (25)

Turn around, position from below into the guide rail (24) using the pin pair (42) and secure the locking levers (41)

Transporting the Power Tool (see figure R)

Before transporting the power tool, the following steps must be carried out:

  • Bring the power tool into the transport position see Transport position.
  • Remove all accessories that cannot be securely fitted to the power tool.
    If possible, transport unused saw blades in an enclosed container.
  • Move the guide rail (24) all the way in and press the clamping handle (23) down to fix it in place.
  • Wrap the power cable around the cable holder (30).
  • Use the carrying handle (69) or the recessed handles (70) to lift or transport the tool.