Auxiliary handle (see figure A)

You can swivel the auxiliary handle (9) to any angle for a safe work posture that minimises fatigue.

• Loosen the knurled nut (10), rotate the auxiliary handle (9) to the required position and retighten the knurled nut (10).

The auxiliary handle (9) can be refitted in a different position.

• To do this, completely unscrew the knurled nut (10) and then pull the hexagon bolt upwards and out.
• Pull off the auxiliary handle (9) to the side and rotate the remaining clamping element by 180°.
• Fit the auxiliary handle (9) by following the steps in reverse order.